Y-cam Camera Manual do Utilizador descarregar pdf (Página 9)

Y-cam YCBL03, YCBLB3, YCK003, YCB003, YCW003, and YCEB03 Setup Manual v2012-04-09(1)

The software will analyze your LAN and report the all the Y-cam network

cameras found as shown in the example below:

If you do not have any Y-cams connected to your LAN then the Y-cam Setup

Software should show that as well. The Name and Location columns above are

assigned an arbitrary value by the user during setup in the Tools section. The Mac

Address can be found stamped on the outside body of the camera.

Double click the subject camera to get Internet Explorer to connect to the

camera’s internal website. Alternatively you can use the IP Address value as a

URL in any browser (FireFox, Chrome, Safari) on any device (PC, Laptop, Mac,

iPad, Netbook, etc) that is connected to the same LAN.

The main purpose of the Y-cam Setup Software will be to find the LAN IP address

of the camera when it powers up and connects to your router. Keep in mind that

the IP address of the camera is assigned by the router. The router may decide to

change that assignment if it is rebooted or devices are added/removed from the

LAN. Therefore it may be necessary to use the Y-cam Setup Software from time

to time to find your camera(s) if their IP addresses have been re-assigned.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 32 33

Sem comentários

Y-cam Camera Manual do Utilizador Página 9