Y-cam Camera Manual do Utilizador Página 48
- Página / 88
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Page 48
6.6.8 Port forwarding if UPNP is not available
If you are not using UPNP or UPNP is disabled on your router, you will need to open a port on your router so that you
can access your Y-cam from the internet..
If you are unsure if UPNP is working on your camera, visit your Y-cam Settings System page. Under UPNP port
forwarding it will labelled as “Success”, “Failed” or “Disabled”.
Firewall security features built into some routers may prevent the camera’s UPNP from configuring your router. Your
router connects to the Internet over a series of “ports” and sometimes the default ports used by the Y-cam are blocked
from access over the Internet, therefore, these ports need to be made accessible.
This is achieved using the Port Forwarding function on your router. The ports used by the camera must be opened
through the router for remote access to your Y-cam. Check your router’s user manual for specific instructions on how to
open and route ports on you router or you can find instructions for how to do this for your specific router on the
following website:
http://www.portforward.com/
1. Visit www.portforward.com
2. Scroll down to select your router model number
3. Skip the advertisement.
4. Select Y-cam IP Wireless camera.
- S Range 1
- SD Range 1
- Bullet Range 1
- Dome Range 1
- HD Range 1
- TABLE OF CONTENTS 2
- 1.0 INTRODUCTION 5
- 1.2 Restrictions 6
- 1.3 Power Supply 6
- 1.4 Maintenance 7
- 1.5 Recommendations 7
- 2.0 EXPLORING YOUR Y-CAM 9
- 3.0 INSTALLATION 16
- 5.0 WELCOME TO YOUR Y-CAM! 21
- Password: 1234 22
- Username: admin 22
- 6.0 Y-CAM SETTINGS 28
- 6.2 System Page 31
- 6.3 Support Page 32
- 6.4 Reboot 33
- 6.5 Camera Menu 34
- 6.5.2 Stream Setup 36
- 6.5.3 OSD Setup 38
- 6.5.4 Night Vision Setup 39
- 6.6 Network Menu 40
- 6.6.1 Wireless Setup 40
- Security Mode Options 41
- 6.6.2 TCP/IP Setup 43
- 6.6.3 PPPoE Setup 44
- 6.6.4 DDNS Setup 45
- 6.6.5 UPnP Setup 46
- 6.7 Alarm Menu 49
- 6.7.1 Digital I/O Setup 49
- Wiring Diagram 50
- Digital I/O Settings 51
- 6.7.2 Motion Detection 52
- 6.7.3 Schedule Setup 54
- 6.7.6 Periodic Sending - FTP 57
- 6.7.8 Buffer Management 59
- 6.8 Alarm Server 60
- 6.8.1 FTP Server 60
- 6.8.2 E-mail Servers 61
- 6.9 Storage 63
- 6.9.1 Storage Setup 63
- 6.9.2 Record on Alarm 64
- 6.9.3 Snapshot on Alarm 65
- 6.9.4 Continuous Record 66
- 6.9.5 Snapshot at Interval 67
- 6.9.6 FTP Sending 68
- 6.9.7 Browse Storage 69
- 6.10 Tools Menu 70
- 6.10.1 System Identity 70
- 6.10.2 User Management 71
- 6.10.3 Date & Time 72
- 6.10.4 Backup and Reset 73
- 6.10.5 Firmware Upgrade 74
- 7.0 ADVANCED SETTINGS 76
- 7.2 Proxy Server Setting 78
- 8.0 TROUBLESHOOTING 86
- 9.0 GLOSSARY OF TERMS 88
Manuais e produtos relacionados com Câmaras de segurança Y-cam Camera
(4 páginas)
(28 páginas)Audiovox NAV101 - NAV 101 - Navigation System manuals
Owner’s manuals and user’s guides for Car media receivers Audiovox NAV101 - NAV 101 - Navigation System.
We providing 2 pdf manuals Audiovox NAV101 - NAV 101 - Navigation System for download free by document types: Owner's Manual
Comentários a estes Manuais